Removal and Replacement

Engine Switch:

Engine Switch:

ENGINE SWITCH

REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
2. REMOVE UPPER NO.1 CONSOLE PANEL GARNISH
3. REMOVE UPPER NO.2 CONSOLE PANEL GARNISH
4. REMOVE CONSOLE PANEL SUB-ASSEMBLY
5. REMOVE FRONT ASH RECEPTACLE SUB-ASSEMBLY
6. REMOVE CONSOLE BOX REGISTER ASSEMBLY
7. REMOVE CONSOLE BOX
8. REMOVE NO.3 INSTRUMENT PANEL REGISTER ASSEMBLY
9. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL
10. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
11. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)




12. REMOVE ENGINE SWITCH
a. Disconnect the switch connector.
b. Detach the 2 claws and remove the switch.

INSTALLATION




1. INSTALL ENGINE SWITCH
a. Attach the 2 claws to install the switch.
b. Connect the switch connector.

2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL
5. INSTALL NO.3 INSTRUMENT PANEL REGISTER ASSEMBLY
6. INSTALL CONSOLE BOX
7. INSTALL CONSOLE BOX REGISTER ASSEMBLY
8. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY
9. INSTALL CONSOLE PANEL SUB-ASSEMBLY
10. INSTALL UPPER NO.2 CONSOLE PANEL GARNISH
11. INSTALL UPPER NO.1 CONSOLE PANEL GARNISH
12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY