Shifter A/T: Adjustments

SHIFT LEVER ASSEMBLY


ADJUSTMENT
1. ADJUST SHIFT LEVER POSITION





a) Remove the nut and disconnect the shifting rod.





b) Turn the control shaft lever of the park/neutral position switch counterclockwise until it stops, and turn it clockwise 2 notches to set it to the N position.
c) Move the shift lever to the N position and tighten the nut while lightly pushing the lever toward the R position.

NOTICE: Do not push the shift lever too hard.

d) After adjustment, check that the shift lever moves smoothly and the shift lever and gear operate correctly