Interior Lighting Relay: Service and Repair

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL
2. REMOVE ENGINE ROOM SIDE COVER LH
3. REMOVE INTEGRATION RELAY
a. Remove the No. 2 relay block cover.




b. Using a screwdriver, detach the 2 claws and disconnect the integration relay from the engine room No. 2 relay block.

HINT: Tape the screwdriver tip before use.

c. Disconnect the 3 connectors.

INSTALLATION




1. INSTALL INTEGRATION RELAY
a. Connect the 3 connectors.
b. Attach the integration relay to the engine room No. 2 relay block.
c. Install the No. 2 relay block cover.

2. INSTALL ENGINE ROOM SIDE COVER LH
3. INSTALL COOL AIR INTAKE DUCT SEAL