Fuel Delivery and Air Induction: Technical Service Bulletins

• Recalls
  • Recall - Fuel Leaks From Fuel Pressure Sensor
    • Dealer Letter
    • Dealer Q&A
    • Owner Letter 1
    • Owner Letter 2
    • Technical Instructions
      • Information
      • I. Operation Flowchart
      • II. Identification of Affected Vehicles
      • III. Preparation
      • IV. Work Procedure Table of Contents
      • V. Background
      • VI. Safety Precautions
      • VII. 2GR-FSE / 4GR-FSE Disassembly Procedure
      • VIII. 3GR-FSE Disassembly Procedure
      • IX. Fuel Pressure Sensor Inspection and Adjustment
      • X. Intake Air Surge Tank Installation
      • XI. Final Reassembly and Inspection
      • XII. Appendix
  • Recall 11V029000: Potential Fuel Pressure Sensor Leaks
  • Recall - Fuel Rail Replacement
    • Dealer Letter
    • Q & A
    • Owner Letter
    • Technical Instructions For 2006-2007 GS300/350
      • Information For 2006-2007 GS300/350
      • I. Operation Flow Chart For 2006-2007 GS300/350
      • II. Identification of Affected Vehicles For 2006-2007 GS300/350
      • III. Preparation For 2006-2007 GS300/350
      • IV. Work Procedure Table of Contents For 2006-2007 GS300/350
      • V. Background For 2006-2007 GS300/350
      • VI. Work Procedure Safety Precautions For 2006-2007 GS300/350
      • VII. Fuel Delivery Pipe Replacement For 2006-2007 GS300/350
        • A. Remove the Engine Covers and Discharge the Fuel System For GS300/350
        • B. Remove the Intake Manifold For 2006-2007 GS300/350
        • C. Remove Fuel Delivery Pipe For 2006-2007 GS300/350
        • D. Remove and Inspect Fuel Injectors For 2006-2007 GS300/350
        • E. Fuel Pipe Installation For 2006-2007 GS300/350
        • F. GS350 2GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
        • G. GS300 3GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
        • H. Check For Fuel Leaks & Reassembly For 2006-2007 GS300/350
      • VIII. Appendix For 2006-2007 GS300/350
    • Technical Instructions For 2006-2007 IS250/350
      • Information For 2006-2007 IS250/350
      • Operation Flow Chart For 2006-2007 IS250/350
      • I. Identification of Affected Vehicles
      • II. Preparation For 2006-2007 IS250/350
      • III. Work Procedure Table of Contents For 2006-2007 IS250/350
      • IV. Background For 2006-2007 IS250/350
      • V. Work Procedure Safety Precautions For 2006-2007 IS250/350
      • VI. Fuel Delivery Pipe Replacement For 2006-2007 IS250/350
        • A. Remove the Engine Covers and Discharge the Fuel System For 2006-2007 IS250/350
        • B. Remove the Intake Manifold For 2006-2007 IS250/350
        • C. Remove Fuel Delivery Pipe
        • D. Remove and Inspect Fuel Injectors
        • E. Fuel Pipe Installation
        • F. Check For Fuel Leaks & Reassembly For 2006-2007 IS250/350
      • VII. Appendix For 2006-2007 IS250/350
    • Technical Instructions For 2007-2008 LS460/LS460L
      • Information For 2007-2008 LS460/LS460L
      • I. Operation Flow Chart For 2007-2008 LS460/LS460L
      • II. Identification of Affected Vehicles For 2007-2008 LS460/LS460L
      • III. Preparation For 2007-2008 LS460/LS460L
      • IV. Table of Contents For 2007-2008 LS460/LS460L
      • V. Background For 2007-2008 LS460/LS460L
      • VI. Work Procedure Safety Precautions For 2007-2008 LS460/LS460L
      • VII. Fuel Delivery Pipe Replacement For 2007-2008 LS460/LS460L
        • A. Remove the Engine Covers and Discharge the Fuel System
        • B. Remove Fuel Delivery Pipe With Fuel Injector
        • C. Replace Fuel Delivery Pipe
        • D. Install Fuel Delivery Pipe With Fuel Injector
        • E. Reinstall the Intake Manifold & Check For Fuel Leaks & Reassembly
      • VIII. Appendix For 2007-2008 LS460/LS460L
  • Recall 09V020000: Fuel Rail Replacement
  • Recall 09V388000: Floor Mat/Accelerator Interference
  • Recall - Floor Mat/Accelerator Pedal Interference
    • Dealer Letter
    • Q&A
    • Owner Letter
    • Lexus Carpeted or All-Weather Floor Mat Inspection, Application and Installation Instructions
    • Sample Chart
• Customer Interest
  • Canada - Engine - Engine Intermittently Runs Rough
• By Symptom
  • Customer Interest
    • Canada - Engine - Engine Intermittently Runs Rough
  • Odors
    • Canada - Exhuast - Sulfur Odor/Smell From Exhaust
  • Recalls
    • Recall - Fuel Leaks From Fuel Pressure Sensor
      • Dealer Letter
      • Dealer Q&A
      • Owner Letter 1
      • Owner Letter 2
      • Technical Instructions
        • Information
        • I. Operation Flowchart
        • II. Identification of Affected Vehicles
        • III. Preparation
        • IV. Work Procedure Table of Contents
        • V. Background
        • VI. Safety Precautions
        • VII. 2GR-FSE / 4GR-FSE Disassembly Procedure
        • VIII. 3GR-FSE Disassembly Procedure
        • IX. Fuel Pressure Sensor Inspection and Adjustment
        • X. Intake Air Surge Tank Installation
        • XI. Final Reassembly and Inspection
        • XII. Appendix
    • Recall 11V029000: Potential Fuel Pressure Sensor Leaks
    • Recall - Fuel Rail Replacement
      • Dealer Letter
      • Q & A
      • Owner Letter
      • Technical Instructions For 2006-2007 GS300/350
        • Information For 2006-2007 GS300/350
        • I. Operation Flow Chart For 2006-2007 GS300/350
        • II. Identification of Affected Vehicles For 2006-2007 GS300/350
        • III. Preparation For 2006-2007 GS300/350
        • IV. Work Procedure Table of Contents For 2006-2007 GS300/350
        • V. Background For 2006-2007 GS300/350
        • VI. Work Procedure Safety Precautions For 2006-2007 GS300/350
        • VII. Fuel Delivery Pipe Replacement For 2006-2007 GS300/350
          • A. Remove the Engine Covers and Discharge the Fuel System For GS300/350
          • B. Remove the Intake Manifold For 2006-2007 GS300/350
          • C. Remove Fuel Delivery Pipe For 2006-2007 GS300/350
          • D. Remove and Inspect Fuel Injectors For 2006-2007 GS300/350
          • E. Fuel Pipe Installation For 2006-2007 GS300/350
          • F. GS350 2GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
          • G. GS300 3GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
          • H. Check For Fuel Leaks & Reassembly For 2006-2007 GS300/350
        • VIII. Appendix For 2006-2007 GS300/350
      • Technical Instructions For 2006-2007 IS250/350
        • Information For 2006-2007 IS250/350
        • Operation Flow Chart For 2006-2007 IS250/350
        • I. Identification of Affected Vehicles
        • II. Preparation For 2006-2007 IS250/350
        • III. Work Procedure Table of Contents For 2006-2007 IS250/350
        • IV. Background For 2006-2007 IS250/350
        • V. Work Procedure Safety Precautions For 2006-2007 IS250/350
        • VI. Fuel Delivery Pipe Replacement For 2006-2007 IS250/350
          • A. Remove the Engine Covers and Discharge the Fuel System For 2006-2007 IS250/350
          • B. Remove the Intake Manifold For 2006-2007 IS250/350
          • C. Remove Fuel Delivery Pipe
          • D. Remove and Inspect Fuel Injectors
          • E. Fuel Pipe Installation
          • F. Check For Fuel Leaks & Reassembly For 2006-2007 IS250/350
        • VII. Appendix For 2006-2007 IS250/350
      • Technical Instructions For 2007-2008 LS460/LS460L
        • Information For 2007-2008 LS460/LS460L
        • I. Operation Flow Chart For 2007-2008 LS460/LS460L
        • II. Identification of Affected Vehicles For 2007-2008 LS460/LS460L
        • III. Preparation For 2007-2008 LS460/LS460L
        • IV. Table of Contents For 2007-2008 LS460/LS460L
        • V. Background For 2007-2008 LS460/LS460L
        • VI. Work Procedure Safety Precautions For 2007-2008 LS460/LS460L
        • VII. Fuel Delivery Pipe Replacement For 2007-2008 LS460/LS460L
          • A. Remove the Engine Covers and Discharge the Fuel System
          • B. Remove Fuel Delivery Pipe With Fuel Injector
          • C. Replace Fuel Delivery Pipe
          • D. Install Fuel Delivery Pipe With Fuel Injector
          • E. Reinstall the Intake Manifold & Check For Fuel Leaks & Reassembly
        • VIII. Appendix For 2007-2008 LS460/LS460L
    • Recall 09V020000: Fuel Rail Replacement
    • Recall 09V388000: Floor Mat/Accelerator Interference
    • Recall - Floor Mat/Accelerator Pedal Interference
      • Dealer Letter
      • Q&A
      • Owner Letter
      • Lexus Carpeted or All-Weather Floor Mat Inspection, Application and Installation Instructions
      • Sample Chart
• All Technical Service Bulletins
  • Canada - Vehicle - Flood Damage Inspection
  • Canada - Engine - Engine Intermittently Runs Rough
  • Canada - Exhuast - Sulfur Odor/Smell From Exhaust
  • Recall - Fuel Leaks From Fuel Pressure Sensor
    • Dealer Letter
    • Dealer Q&A
    • Owner Letter 1
    • Owner Letter 2
    • Technical Instructions
      • Information
      • I. Operation Flowchart
      • II. Identification of Affected Vehicles
      • III. Preparation
      • IV. Work Procedure Table of Contents
      • V. Background
      • VI. Safety Precautions
      • VII. 2GR-FSE / 4GR-FSE Disassembly Procedure
      • VIII. 3GR-FSE Disassembly Procedure
      • IX. Fuel Pressure Sensor Inspection and Adjustment
      • X. Intake Air Surge Tank Installation
      • XI. Final Reassembly and Inspection
      • XII. Appendix
  • Recall 11V029000: Potential Fuel Pressure Sensor Leaks
  • Recall - Fuel Rail Replacement
    • Dealer Letter
    • Q & A
    • Owner Letter
    • Technical Instructions For 2006-2007 GS300/350
      • Information For 2006-2007 GS300/350
      • I. Operation Flow Chart For 2006-2007 GS300/350
      • II. Identification of Affected Vehicles For 2006-2007 GS300/350
      • III. Preparation For 2006-2007 GS300/350
      • IV. Work Procedure Table of Contents For 2006-2007 GS300/350
      • V. Background For 2006-2007 GS300/350
      • VI. Work Procedure Safety Precautions For 2006-2007 GS300/350
      • VII. Fuel Delivery Pipe Replacement For 2006-2007 GS300/350
        • A. Remove the Engine Covers and Discharge the Fuel System For GS300/350
        • B. Remove the Intake Manifold For 2006-2007 GS300/350
        • C. Remove Fuel Delivery Pipe For 2006-2007 GS300/350
        • D. Remove and Inspect Fuel Injectors For 2006-2007 GS300/350
        • E. Fuel Pipe Installation For 2006-2007 GS300/350
        • F. GS350 2GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
        • G. GS300 3GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
        • H. Check For Fuel Leaks & Reassembly For 2006-2007 GS300/350
      • VIII. Appendix For 2006-2007 GS300/350
    • Technical Instructions For 2006-2007 IS250/350
      • Information For 2006-2007 IS250/350
      • Operation Flow Chart For 2006-2007 IS250/350
      • I. Identification of Affected Vehicles
      • II. Preparation For 2006-2007 IS250/350
      • III. Work Procedure Table of Contents For 2006-2007 IS250/350
      • IV. Background For 2006-2007 IS250/350
      • V. Work Procedure Safety Precautions For 2006-2007 IS250/350
      • VI. Fuel Delivery Pipe Replacement For 2006-2007 IS250/350
        • A. Remove the Engine Covers and Discharge the Fuel System For 2006-2007 IS250/350
        • B. Remove the Intake Manifold For 2006-2007 IS250/350
        • C. Remove Fuel Delivery Pipe
        • D. Remove and Inspect Fuel Injectors
        • E. Fuel Pipe Installation
        • F. Check For Fuel Leaks & Reassembly For 2006-2007 IS250/350
      • VII. Appendix For 2006-2007 IS250/350
    • Technical Instructions For 2007-2008 LS460/LS460L
      • Information For 2007-2008 LS460/LS460L
      • I. Operation Flow Chart For 2007-2008 LS460/LS460L
      • II. Identification of Affected Vehicles For 2007-2008 LS460/LS460L
      • III. Preparation For 2007-2008 LS460/LS460L
      • IV. Table of Contents For 2007-2008 LS460/LS460L
      • V. Background For 2007-2008 LS460/LS460L
      • VI. Work Procedure Safety Precautions For 2007-2008 LS460/LS460L
      • VII. Fuel Delivery Pipe Replacement For 2007-2008 LS460/LS460L
        • A. Remove the Engine Covers and Discharge the Fuel System
        • B. Remove Fuel Delivery Pipe With Fuel Injector
        • C. Replace Fuel Delivery Pipe
        • D. Install Fuel Delivery Pipe With Fuel Injector
        • E. Reinstall the Intake Manifold & Check For Fuel Leaks & Reassembly
      • VIII. Appendix For 2007-2008 LS460/LS460L
  • Recall 09V020000: Fuel Rail Replacement
  • Recall 09V388000: Floor Mat/Accelerator Interference
  • Recall - Floor Mat/Accelerator Pedal Interference
    • Dealer Letter
    • Q&A
    • Owner Letter
    • Lexus Carpeted or All-Weather Floor Mat Inspection, Application and Installation Instructions
    • Sample Chart
  • Engine Controls - Accelerator Pedal Sensor Service Precautions
  • Canada - Engine Controls - Accelerator Pedal Sensor Precaution