Headlamp Alignment Sensor: Service and Repair

Height Control Sensor:

Height Control Sensor:

HEIGHT CONTROL SENSOR

REMOVAL




1. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY (for 2WD)
a. Disconnect the connector.
b. Remove the nut.




c. Remove the 2 bolts and front height control sensor sub-assembly.




2. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY (for 4WD)
a. Disconnect the connector.
b. Remove the bolt.




c. Remove the 2 bolts and front height control sensor sub-assembly.




3. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY
a. Disengage the clamp and disconnect the connector.




b. Put matchmarks on the rear height control sensor link and bracket.




c. Remove the 2 bolts, nut and rear height control sensor sub-assembly.

INSTALLATION




1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

a. When replacing the rear height control sensor sub-assembly:
1. Align the matchmarks and also the trace of the nut, and install the rear height control sensor sub-assembly and bracket.

b. When reusing the rear height control sensor sub-assembly:
1. Align the matchmarks on the rear height control sensor sub-assembly and bracket.

c. Install the rear height control sensor sub-assembly with the 2 bolts and nut.

Torque:
Bolt 14 N.m (143 kgf.cm, 10 ft.lbf)
Nut 5.4 N.m (55 kgf.cm, 48 in.lbf)




d. Install the clamp.
e. Connect the connector.




2. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY (for 4WD)
a. Install the 2 bolts.

Torque: 14 N.m (143 kgf.cm, 10 ft.lbf)




b. Install the front height control sensor sub-assembly with the bolt.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

c. Connect the connector.




3. INSTALL FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY (for 2WD)
a. Install the 2 bolts.

Torque: 14 N.m (143 kgf.cm, 10 ft.lbf)




b. Install the front height control sensor sub-assembly with the nut.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

c. Connect the connector.

4. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT
5. PREPARATION FOR HEADLIGHT AIMING (Using a tester)
6. PREPARATION FOR HEADLIGHT AIMING (Using a screen)
7. HEADLIGHT AIMING INSPECTION
8. HEADLIGHT AIMING ADJUSTMENT