Cylinder Head Assembly: Specifications

Right Bank:

Left Bank:

Cylinder Head Bolts
First Pass 36 Nm (367 kgf-cm, 27 ft. lbs.)
Second Pass 90°
Final Pass 90°





Cylinder Head Bolt Inspection
Standard O.D. 10.85 to 11.00 mm (0.4272 to 0.4331 inch)
Minimum O.D. 10.70 mm (0.4213 inch)

Surface Variation-Warpage
Cylinder Head Lower
Standard 0.05 mm (0.0020 inch)
Maximum 0.10 mm (0.0039 inch)
Intake
Standard 0.08 mm (0.0031 inch)
Maximum 0.10 mm (0.0039 inch)
Exhaust
Standard 0.08 mm (0.0031 inch)
Maximum 0.10 mm (0.0039 inch)

Intake Manifold Bolts & Nuts 21 Nm (214 kgf-cm, 15 ft. lbs.)

Camshaft Bearing Cap Bolts








First Pass 10 Nm (102 kgf-cm, 7 ft. lbs.)








Second Pass 28 Nm (286 kgf-cm, 21 ft. lbs.)








Final Pass 16 Nm (163 kgf-cm, 12 ft. lbs.)

Camshaft Gear Flange Bolt 100 Nm (1,020 kgf-cm, 74 ft. lbs.)








New Exhaust Manifold Nuts 21 Nm (214 kgf-cm, 15 ft. lbs.)
Tighten nuts "A" first