Luggage Compartment Door Opener Main Switch

LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH

Luggage Compartment Door Opener Main Switch:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

2. REMOVE FRONT DOOR SCUFF PLATE RH (w/o Illumination)
3. REMOVE FRONT DOOR SCUFF PLATE RH (w/ Illumination)
4. REMOVE FRONT DOOR OPENING TRIM COVER RH
5. REMOVE SIDE INSTRUMENT PANEL RH
6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
7. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
9. REMOVE LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH





a. Disengage the 2 claws and remove the luggage compartment door opener main switch.

INSTALLATION

1. INSTALL LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH





a. Engage the 2 claws and install the luggage compartment door opener main switch.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
5. INSTALL SIDE INSTRUMENT PANEL RH
6. INSTALL FRONT DOOR OPENING TRIM COVER RH
7. INSTALL FRONT DOOR SCUFF PLATE RH (w/o Illumination)
8. INSTALL FRONT DOOR SCUFF PLATE RH (w/ Illumination)
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. PERFORM INITIALIZATION

NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal.

11. INSPECT SRS WARNING LIGHT