Radio/Stereo: Service and Repair

Radio Receiver:

Radio Receiver:

RADIO RECEIVER

REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
3. REMOVE UPPER NO.1 CONSOLE PANEL GARNISH (for Automatic Transmission)
4. REMOVE UPPER NO.2 CONSOLE PANEL GARNISH (for Automatic Transmission)
5. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)
6. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)
7. REMOVE FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)
8. REMOVE FRONT ASH RECEPTACLE SUB-ASSEMBLY
9. REMOVE CONSOLE BOX REGISTER ASSEMBLY
10. REMOVE CONSOLE BOX
11. REMOVE NO.3 INSTRUMENT PANEL REGISTER ASSEMBLY
12. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL




13. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
a. Remove the 4 bolts.
b. Pull the integration control panel w/ radio receiver assembly toward the rear of the vehicle.
c. Disconnect each connector and remove the panel.




14. REMOVE NO.1 RADIO BRACKET (w/o Navigation System)
a. Remove the 6 bolts and radio No.1 bracket.




15. REMOVE NO.2 RADIO BRACKET (w/o Navigation System)
a. Remove the 6 bolts and radio No.2 bracket.




16. REMOVE RADIO RECEIVER ASSEMBLY (w/o Navigation System)
a. Slide the integration control panel in the direction shown by the arrow to remove the radio receiver assembly.




17. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
a. Remove the 4 bolts.
b. Pull the multi-display w/ radio receiver assembly toward the rear of the vehicle.
c. Disconnect each connector and remove the multi-display.




18. REMOVE NO.1 RADIO BRACKET (w/ Navigation System)
a. Disengage the connector clamp.




b. Remove the 7 bolts and radio No.1 bracket.




19. REMOVE NO.2 RADIO BRACKET (w/ Navigation System)
a. Remove the 7 bolts and radio No.2 bracket.




20. REMOVE RADIO RECEIVER ASSEMBLY (w/ Navigation System)
a. Slide the multi-display in the direction shown by the arrow to remove the radio receiver assembly.

INSTALLATION




1. INSTALL RADIO RECEIVER ASSEMBLY (w/o Navigation System)
a. Install the radio receiver assembly as shown in the illustration.




2. INSTALL NO.2 RADIO BRACKET (w/o Navigation System)
a. Install the radio No.2 bracket with the 6 bolts.




3. INSTALL NO.1 RADIO BRACKET (w/o Navigation System)
a. Install the radio No.1 bracket with the 6 bolts.

4. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
a. Connect each connector.




b. Install the integration control panel w/ radio receiver assembly with the 4 bolts.




5. INSTALL RADIO RECEIVER ASSEMBLY (w/ Navigation System)
a. Install the radio receiver assembly as shown in the illustration.




6. INSTALL NO.2 RADIO BRACKET (w/ Navigation System)
a. Install the radio No.2 bracket with the 7 bolts.




7. INSTALL NO.1 RADIO BRACKET (w/ Navigation System)
a. Install the radio No.1 bracket with the 7 bolts.




b. Engage the connector clamp.

8. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
a. Connect each connector.




b. Install the the multi-display w/ radio receiver assembly with the 4 bolts.

9. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL
10. INSTALL NO.3 INSTRUMENT PANEL REGISTER ASSEMBLY
11. INSTALL CONSOLE BOX
12. INSTALL CONSOLE BOX REGISTER ASSEMBLY
13. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY
14. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)
15. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)
16. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)
17. INSTALL UPPER NO.2 CONSOLE PANEL GARNISH (for Automatic Transmission)
18. INSTALL UPPER NO.1 CONSOLE PANEL GARNISH (for Automatic Transmission)
19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
20. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)
21. ADJUST CLOCK