FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Disassembly and Reassembly

DISASSEMBLY

1. REMOVE BRAKE ACTUATOR ASSEMBLY
a. Remove the 2 nuts and brake actuator assembly from the actuator bracket.

REASSEMBLY

1. INSTALL BRAKE ACTUATOR ASSEMBLY
a. Install the actuator assembly to the actuator bracket with the 2 nuts.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

NOTE: Do not remove the hole plug before connecting the brake tube because a new brake actuator assembly is filled with brake fluid.