Inspection

INSPECTION
1. INSPECT BRAKE MASTER CYLINDER SUBASSEMBLY
(a) Inspect the brake master cylinder sub-assembly. If any of the following occurs, replace the brake master cylinder sub-assembly with a new one:
^ The surface of the brake master cylinder subassembly is cracked, dented, or chipped off.

2. INSPECT BRAKE STROKE SIMULATOR CYLINDER SUB-ASSEMBLY
(a) Inspect the brake stroke simulator cylinder subassembly.
If any of the following occurs, replace the brake stroke simulator cylinder sub-assembly with a new one:
^ The surface of the brake stroke simulator cylinder sub-assembly is cracked, dented, or chipped off.