P0128

DTC P0128 Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

DESCRIPTION

DTC Detection Condition:

This DTC is set when the Engine Coolant Temperature (ECT) does not reach 75 °C(167 °F) despite sufficient engine warm-up time.

MONITOR DESCRIPTION

Monitor Strategy:

Typical Enabling Conditions:

Typical Malfunction Thresholds:

The ECM estimates the ECT based on the starting temperature, engine loads, and engine speeds. The ECM then compares the estimated temperature with the actual ECT. When the estimated ECT reaches 75 °C (167 °F), the ECM checks the actual ECT. If the actual ECT is less than 75 °C (167 °F), the ECM interprets this as a malfunction in the thermostat or the engine cooling system and sets the DTC.

Step 1:

Step 1(Continued)-3:

INSPECTION PROCEDURE

HINT: Read freeze frame data using the intelligent tester. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was running or stopped, whether the engine was warmed up or not, whether the air-fuel ratio was lean or rich, as well as other data recorded at the time of a malfunction.