Initialization Not Completed

DTC C2177/77 Initialization not Completed

DESCRIPTION
Initialization is necessary after replacing any of the ECU, tires with different tire pressure, or tire pressure warning valve and transmitter, after rotating the tires or when a new vehicle is delivered.

C2177/77:

INSPECTION PROCEDURE

NOTICE:
^ When replacing the tire pressure warning ECU, read the IDs stored in the old ECU using the intelligent tester and write them down before removal.
^ It is necessary to perform initialization after registration of the transmitter IDs into the tire pressure warning ECU after the ECU and/or valve and transmitter has been replaced. Initialization

Steps 1-2(Part 1):

Steps 2(Part 2)-4(Part 1):

Step 4(Part 2):