B2243
DTC B2243 Current Steering Angle Mid-point UnsetDESCRIPTION
DTC Detection Condition:
This DTC is output when one of the following occurs: 1) the initial learning operation is not completed; 2) after the initial learning operation is completed, power is cut due to the battery cable being disconnected and reconnected, etc.; or 3) a data blockage at the steering angle sensor or variable gear ratio steering system occurs.
HINT: Steering angle sensor data is received through the CAN line. When data blockage occurs, it is displayed on the multi-information display.
INSPECTION PROCEDURE
Step 1-3:
Step 3 (Continued)-4:
