B1822

DTC B1822/55 Short to GND in Side Squib RH Circuit

DESCRIPTION

DTC Detection Condition:

The side squib RH circuit consists of the center airbag sensor assembly and the front seat airbag assembly RH.

This circuit instructs the SRS to deploy when deployment conditions are met.

These DTCs are recorded when a malfunction is detected in the side squib RH circuit.

Wiring Diagram:

INSPECTION PROCEDURE
- Perform the simulation method by selecting the "check mode" (signal check) with the intelligent tester.
- After selecting the "check mode" (signal check), perform the simulation method by wiggling each connector of the airbag system or driving the vehicle on a city or rough road.

Step 1:

Step 2:

Step 2 (Continued)-3: