Without Scan Tool
DTC CHECK / CLEAR1. CHECK DTC (USING SST CHECK WIRE)
(a) Turn the engine switch off.
(b) Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.
SST 09843-18040
(c) Turn the engine switch on (IG).
(d) Read and record any DTCs indicated by the multi-information display on the combination meter.
HINT:
^ If the multi-information display does not indicate any DTCs or the normal system code, inspect the multi-information display or TC and CG terminal circuit.
^ If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.
(e) Refer to the DIAGNOSTIC TROUBLE CODE CHART for DTC information. Diagnostic Trouble Code Descriptions
(f) After completing the check, turn the engine switch off and remove SST from the DLC3.
SST 09843-18040
2. CHECK DTC (USING INTELLIGENT TESTER)
(a) Turn the engine switch off.
(b) Connect the intelligent tester to the DLC3.
(c) Turn the engine switch on (IG) and the tester on.
(d) Read the DTCs following the prompts on the tester screen.
HINT:
Refer to the intelligent tester operator's manual for further details.
3. CLEAR DTC
HINT:
After repairing the malfunctions, clear the DTCs.
(a) Connect the intelligent tester to the DLC3.
(b) Turn the engine switch on (IG) and the tester on.
(c) Clear the DTCs following the prompts on the tester screen.
HINT:
Refer to the intelligent tester operator's manual for further details.