Crankshaft, Engine

Crankshaft
Crankshaft thrust clearance
Standard 0.04 to 0.24 (0.0016 to 0.0094 in.)
Maximum 0.30 mm (0.0118 in.)
Thrust washer thickness 2.43 to 2.48 mm (0.0957 to 0.0976 in.)
Crankshaft circle runout
Maximum 0.06 mm (0.0024 in.)
Crank pin diameter 52.992 to 53.000 mm (2.0863 to 2.0866 in.)
Crank pin taper and out-of-round Maximum 0.02 mm (0.0008 in.)
Crankshaft oil clearance
Standard 0.045 to 0.067 mm (0.0018 to 0.0026 in.)
Minimum 0.070 mm (0.0028 in.)