Air Bag Control Module: Testing and Inspection

ON-VEHICLE INSPECTION

1. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check.

2. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
a. Perform a diagnostic system check.

3. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
a. Replace the front airbag sensor.

CAUTION: For removal and installation procedures of the front airbag sensor. Be sure to follow the correct procedure.

HINT: The front airbag sensor should be replaced after any of the airbags has deployed, as it has been subjected to the impact.