Overhaul

BRAKE PEDAL

COMPONENTS (Part 1):

COMPONENTS (Part 2) (for 2GR-FSE):

COMPONENTS (Part 3) (for 3UZ-FE):

DISASSEMBLY
1. REMOVE STOP LIGHT SWITCH ASSEMBLY
(a) Loosen the lock nut and remove the stop light switch assembly.

2. REMOVE CUSHION
(a) Remove the cushion.

3. REMOVE BRAKE PEDAL PAD
(a) Remove the brake pedal pad.

4. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY

REASSEMBLY
1. INSTALL BRAKE PEDAL STROKE SENSOR ASSEMBLY
2. INSTALL BRAKE PEDAL PAD
3. INSTALL CUSHION
4. INSTALL STOP LIGHT SWITCH ASSEMBLY
(a) Temporarily install the stop light switch assembly with the lock nut.
(b) Fully tighten the stop light switch assembly with the lock nut after inspecting and adjusting brake pedal height.