Rear Hydraulic System LH Malfunction

DTC C1344/65 Rear Hydraulic System LH Malfunction

DESCRIPTION

DTC Detection Condition:

The skid control ECU inputs the operating fluid pressure of each wheel cylinder using the wheel cylinder pressure sensors in order to control the braking force of each wheel.

DTCs may be stored if brake fluid leaks, wheel cylinder vibrates due to uneven wear of the brake disc rotor, of foreign matter enters the solenoid valve.

DTCs may be stored if the line pressure drops during air bleeding.

Wiring Diagram:

Step 1-3:

Step 3(Continued)-5:

Step 5(Continued)-6:

INSPECTION PROCEDURE

NOTE: When replacing the brake actuator assembly, perform initialization of linear solenoid valve and calibration. Initialization