DTC 47

DTC C1247/47 Stroke Sensor Malfunction

DESCRIPTION

DTC Detection Condition:

The stroke sensor inputs the pedal stroke into the skid control ECU.
DTC C1346/71 can be deleted when the brake pedal stroke sensor sends a stroke sensor signal or the Test Mode ends. DTC C1346/71 is output only in the Test Mode.

Wiring Diagram:

Step 1-2:

Step 2(Continued)-4:

Step 5-7:

Step 7(Continued)-8:

INSPECTION PROCEDURE

NOTE: When replacing the skid control ECU or brake pedal stroke sensor, perform initialization of linear solenoid valve and calibration. Initialization