C1296

DTC C1296/96 JABS Malfunction

DESCRIPTION
If a malfunction in the speed sensor signal circuit occurs, the 4WD control ECU will output this DTC. When slip is detected based on signals sent from the 4 vehicle speed sensors, the 4WD control ECU controls torque distribution between front and rear wheels according to the amount of slip.

DTC DETECTION CONDITION:

WIRING DIAGRAM:

HINT: Check the condition of each related circuit connector before troubleshooting.

INSPECTION PROCEDURE

Step 1:

Step 1 (Continued)-3:

Steps 4-5:

Step 5 (Continued)-7:

Step 7 (Continued):