Rear Axle Hub Bolt
REAR AXLE HUB BOLTCOMPONENTS:
REPLACEMENT
1. REMOVE REAR WHEEL
2. REMOVE REAR DISC BRAKE CALIPER ASSEMBLY
3. REMOVE REAR DISC
4. REMOVE REAR AXLE HUB BOLT
(a) Temporarily install the 2 nuts and washers to the rear axle hub bolt as shown in the illustration.
(b) Using SST and a brass bar or a similar tool to hold the hub and bearing assembly, remove the rear axle hub bolt.
SST 09628-10011
5. INSTALL REAR AXLE HUB BOLT
(a) Install a washer and nut to a new bolt as shown in the illustration.
(b) Using a brass bar or a similar tool to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.
6. INSTALL REAR DISC
7. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY
8. INSTALL REAR WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)