Front Axle Hub Bolt
FRONT AXLE HUB BOLTCOMPONENTS:
REPLACEMENT
1. REMOVE FRONT WHEEL
2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY
3. REMOVE FRONT DISC
4. REMOVE FRONT AXLE HUB BOLT
(a) Temporarily install the 2 nuts and washers to the front axle hub bolt as shown in the illustration.
(b) Using SST and a brass bar or a similar tool to hold the front axle, remove the front axle hub bolt.
SST 09628-10011
5. INSTALL FRONT AXLE HUB BOLT
(a) Install a washer and nut to a new front axle hub bolt as shown in the illustration.
(b) Using a brass bar or a similar tool to hold the front axle, install the hub bolt by torquing the nut.
6. INSTALL FRONT DISC
7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY
8. INSTALL FRONT WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)