Transmission Revolution Sensor

TRANSMISSION REVOLUTION SENSOR

REPLACEMENT





1. REMOVE TRANSMISSION REVOLUTION SENSOR (NT)
a. Disconnect the transmission revolution sensor connector.
b. Remove the bolt and transmission revolution sensor.
c. Remove the O-ring from the transmission revolution sensor.





2. REMOVE TRANSMISSION REVOLUTION SENSOR (SP2)
a. Disconnect the transmission revolution sensor connector.
b. Remove the bolt and transmission revolution sensor.
c. Remove the O-ring from the transmission revolution sensor.





3. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2)
a. Coat a new O-ring with ATF and install it to the transmission revolution sensor.
b. Install the transmission revolution sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Connect the transmission revolution sensor connector.





4. INSTALL TRANSMISSION REVOLUTION SENSOR (NT)
a. Coat a new O-ring with ATF and install it to the transmission revolution sensor.
b. Install the transmission revolution sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Connect the transmission revolution sensor connector.