Speed Sensor

SPEED SENSOR

REPLACEMENT
1. REMOVE TRANSMISSION REVOLUTION SENSOR





a. Remove the transmission revolution sensor (NT).
1. Disconnect the transmission revolution sensor connector.
2. Remove the bolt and transmission revolution sensor.
3. Remove the O-ring from the transmission revolution sensor.





b. Remove the transmission revolution sensor (SP2).
1. Disconnect the transmission revolution sensor connector.
2. Remove the bolt and transmission revolution sensor.
3. Remove the O-ring from the transmission revolution sensor.

2. INSTALL TRANSMISSION REVOLUTION SENSOR





a. Install the transmission revolution sensor (SP2 sensor).
1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.
2. Install the transmission revolution sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
3. Connect the transmission revolution sensor connector.





b. Install the transmission revolution sensor (NT sensor).
1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.
2. Install the transmission revolution sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
3. Connect the transmission revolution sensor connector.