Shifter A/T: Testing and Inspection
FLOOR SHIFT ASSYON-VEHICLE INSPECTION
e. Measure resistance between each terminal of shift lock control unit assy when the shift lever is moved to each position.
Standard:
INSPECTION
1. INSPECT PATTERN SELECT SWITCH ASSY NO. 1
a. Disconnect the pattern select switch assembly No. 1 connector.
b. Measure the resistance according to the value(s) in the table.
SST 0982-00030, 09083-00150
Standard:
c. Connect the battery's positive(+) terminal to terminal 2 (ILL+) and the battery's negative(-) terminal to terminal 4 (ILL-).
Then check the illumination of the switch.
Standard: Turn on the illumination.