Without Scan Tool

CLEAR DTC (NOT USING HAND-HELD TESTER)







a. Turn the ignition switch ON.
b. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

SST 09843-18040

c. Within 15 seconds after connecting terminals 13 (TC) and 4 (CG), change the switch between "MAIN" and "2nd" 4 cycles or more.
d. Check that the blinking pattern of the tire pressure warning lamp shows the normal code.
e. Disconnect terminals 13 (TC) and 4 (CG).

SST 09843-18040