Camshaft Timing Oil Control Valve Assy LH

Camshaft Timing Oil Control Valve Assy LH:

REPLACEMENT

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE V-BANK COVER

a. Remove the 2 nuts and V-bank cover.

3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a. Disconnect the oil control valve connector.
b. Remove the bolt, oil control valve and O-ring.

4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a. Install a new O-ring to the oil control valve.
b. Install the oil control valve with the bolt.

Torque: 8.5 N.m (87 kgf.cm, 75 in.lbf)

c. Connect the oil control valve connector.

5. INSTALL V-BANK COVER

a. Install the V-bank cover with the 2 nuts.

Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.