Check Warning Light

CHECK WARNING LIGHT AND INDICATOR LIGHT




a. Release the parking brake pedal.

NOTE: When releasing the parking brake, move the shift lever into the P position to hold the vehicle for safety.




b. When the ignition switch is turned ON, check that the ABS warning light, brake warning light, VSC warning light, VSC OFF indicator light, and SLIP indicator light turn off in approximately 3 seconds.


HINT:
- When the parking brake is applied or the level of the brake fluid is low, the brake warning light illuminates.
- If the ECU stores DTC, the ABS warning light, VSC warning light and VSC OFF indicator light illuminate.
- When depressing the brake pedal repeatedly, it may turn on the brake warning light and buzzer