C0205

DTC C0200/31 RIGHT FRONT SPEED SENSOR CIRCUIT
DTC C0205/32 LEFT FRONT SPEED SENSOR CIRCUIT
DTC C1235/35 FOREIGN MATTER IS ATTACHED ON TIP OF RIGHT FRONT SENSOR
DTC C1236/36 FOREIGN MATTER IS ATTACHED ON TIP OF LEFT FRONT SENSOR

CIRCUIT DESCRIPTION

DTC Detection Condition:

The speed sensor detects wheel speed and transmits the appropriate signals to the ECU. These signals are used for control of the ABS and VSC control systems. Each of the front and rear rotors has 48 serrations. When the rotors rotate, the magnetic field generated by the permanent magnet in the speed sensor induces an AC voltage. Since the frequency of this AC voltage changes in direct proportion to the speed of the rotor, the frequency is used by the ECU to detect the speed of each wheel.

HINT:
DTCs No. C0200/31 and C1235/35 are the front speed sensor RH.
DTCs No. C0205/32 and C1236/36 are the front speed sensor LH.

Wiring Diagram:

Step 1:

Step 2-3:

Step 4-5:

Step 6-7:

INSPECTION PROCEDURE

HINT: Start the inspection from step 1 when using hand-held tester and start from step 2 when not using hand-held tester.