On-Vehicle Inspection

ON-VEHICLE INSPECTION

1. BASIC INSPECTION
a. With the ignition switch ON, the shift lever in the P position and the rear sunshade fully open, press the rear sunshade switch built into the front or rear control switch. Check that the rear sunshade closes fully.
b. After step (a), press the same switch again and check that the rear sunshade opens fully.
c. With the ignition switch ON, the shift lever in the P position and the rear sunshade fully closed, move the shift lever into the R (reverse) position. Check that the rear sunshade opens fully.
d. Turn the ignition switch OFF while the rear sunshade is moving up/down. Check that the rear sunshade stops moving.
e. After step (d), turn the ignition switch ON and press the rear sunshade switch built into the front or rear control switch. Check that the rear sunshade opens fully.