Window Shade: Service and Repair
REAR SUNSHADEREPLACEMENT
HINT:
- The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.
- A bolt without a torque specification is shown in the standard bolt chart.
1. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
a. Remove the rear door scuff plate LH and RH.
b. Remove the rear door opening trim weatherstrip LH and RH.
c. Remove the rear seat side cover LH and RH.
d. Remove the roof side garnish inner LH and RH.
e. Remove the rear speaker grille.
f. Remove the package tray trim panel.
2. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY NO. 2
a. Remove the center stop lamp.
b. Remove the package tray trim panel.
3. REMOVE REAR SUNSHADE
a. Disconnect the connector.
b. Remove the 6 bolts.
c. Remove the sunshade.
NOTE: Be careful not to damage the vehicle body and glass.