Front

FRONT AXLE LH HUB BOLT
REPLACEMENT
1. REMOVE FRONT WHEEL LH
2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY LH
3. REMOVE FRONT DISC





4. REMOVE FRONT AXLE LH HUB BOLT
a. Using SST and a brass bar or an equivalent to hold, re move the hub bolt.
SST 09628-10011





5. INSTALL FRONT AXLE LH HUB BOLT
a. Install a washer and nut to the bolt, as shown in the illustration.
b. Using a brass bar or an equivalent to hold, turn the wheel nut to pull the hub bolt until the underside of the hub bolt head touches the axle hub.
6. INSTALL FRONT DISC
7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY LH
8. INSTALL FRONT WHEEL LH
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)