With Manufacturer's Scan Tool

CLEAR DTC (USING HAND-HELD TESTER)




a. Clearing the DTCs.
1. Connect the hand-held tester to the DLC3.
2. Turn the ignition switch to the ON position.
3. Operate the hand-held tester to clear the codes.

HINT: Refer to the hand-held tester operator's manual for further details.

END OF DTC CLEAR

a. Turn the ignition switch to the ON position
b. Check that the ABS warning lamp go off within approximately 3 seconds.
c. Check that VSC does not appear on the multi information display.