Television Camera ECU

Audio Visual System Part 1:

TELEVISION CAMERA ECU

REPLACEMENT

HINT:
- Installation is in the reverse order of removal.

1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
2. REMOVE DECK TRIM SIDE BOARD RH
3. REMOVE REAR FLOOR FINISH PLATE
4. SEPARATE LUGGAGE COMPARTMENT TRIM COVER FRONT
5. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH




6. REMOVE TELEVISION CAMERA ECU
a. Disconnect the connector and remove the bolt.
b. Pull out the television camera ECU along the stereo component amplifier assembly guide toward the rear of the vehicle to remove it.
If the television camera ECU is not easily removed due to a lack of space between the television camera ECU and the vehicle, remove the television camera ECU together with the stereo component amplifier assembly.

7. INSTALL TELEVISION CAMERA ECU
a. Install the television camera ECU by aligning it with the stereo component amplifier assembly guide, and tighten the bolt.
b. Connect the connector.

HINT: After the replacement, perform the screen noise automatic adjustment when screen noise occurs.