Powertrain Management: Technical Service Bulletins
- Recalls
- Recall - Fuel Leaks From Fuel Pressure Sensor
- Dealer Letter
- Dealer Q&A
- Owner Letter 1
- Owner Letter 2
- Technical Instructions
- Information
- I. Operation Flowchart
- II. Identification of Affected Vehicles
- III. Preparation
- IV. Work Procedure Table of Contents
- V. Background
- VI. Safety Precautions
- VII. 2GR-FSE / 4GR-FSE Disassembly Procedure
- VIII. 3GR-FSE Disassembly Procedure
- IX. Fuel Pressure Sensor Inspection and Adjustment
- X. Intake Air Surge Tank Installation
- XI. Final Reassembly and Inspection
- XII. Appendix
- Recall 11V029000: Potential Fuel Pressure Sensor Leaks
- Recall 05V565000: Potential Accelerator Pedal Sticking
- Recall 07V545000: Fuel Line Replacement
- Recall 09V020000: Fuel Rail Replacement
- Recall - Fuel Pipe Replacement
- Dealer Letter
- Q & A
- Owner Letter
- Technical Instructions
- Information
- I. Operation Flow Chart
- II. Identification of Affected Vehicles
- III. Background
- IV. Preparation
- V. Safety Precautions
- VI. Work Procedure Table of Contents
- VII. Fuel Pipe Replacement
- VIII. 2006 GS 300 Disassembly & Reassembly
- IX. 2006 IS 250 Disassembly & Reassembly
- X. 2006 IS 350 Disassembly & Reassembly
- XI. Recalled Parts Disposal
- XII. Appendix
- Recall - Accelerator Pedal/Carpet Interference
- Recall - Fuel Rail Replacement
- Dealer Letter
- Q & A
- Owner Letter
- Technical Instructions For 2006-2007 GS300/350
- Information For 2006-2007 GS300/350
- I. Operation Flow Chart For 2006-2007 GS300/350
- II. Identification of Affected Vehicles For 2006-2007 GS300/350
- III. Preparation For 2006-2007 GS300/350
- IV. Work Procedure Table of Contents For 2006-2007 GS300/350
- V. Background For 2006-2007 GS300/350
- VI. Work Procedure Safety Precautions For 2006-2007 GS300/350
- VII. Fuel Delivery Pipe Replacement For 2006-2007 GS300/350
- A. Remove the Engine Covers and Discharge the Fuel System For GS300/350
- B. Remove the Intake Manifold For 2006-2007 GS300/350
- C. Remove Fuel Delivery Pipe For 2006-2007 GS300/350
- D. Remove and Inspect Fuel Injectors For 2006-2007 GS300/350
- E. Fuel Pipe Installation For 2006-2007 GS300/350
- F. GS350 2GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
- G. GS300 3GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
- H. Check For Fuel Leaks & Reassembly For 2006-2007 GS300/350
- VIII. Appendix For 2006-2007 GS300/350
- Technical Instructions For 2006-2007 IS250/350
- Information For 2006-2007 IS250/350
- Operation Flow Chart For 2006-2007 IS250/350
- I. Identification of Affected Vehicles
- II. Preparation For 2006-2007 IS250/350
- III. Work Procedure Table of Contents For 2006-2007 IS250/350
- IV. Background For 2006-2007 IS250/350
- V. Work Procedure Safety Precautions For 2006-2007 IS250/350
- VI. Fuel Delivery Pipe Replacement For 2006-2007 IS250/350
- VII. Appendix For 2006-2007 IS250/350
- Technical Instructions For 2007-2008 LS460/LS460L
- Information For 2007-2008 LS460/LS460L
- I. Operation Flow Chart For 2007-2008 LS460/LS460L
- II. Identification of Affected Vehicles For 2007-2008 LS460/LS460L
- III. Preparation For 2007-2008 LS460/LS460L
- IV. Table of Contents For 2007-2008 LS460/LS460L
- V. Background For 2007-2008 LS460/LS460L
- VI. Work Procedure Safety Precautions For 2007-2008 LS460/LS460L
- VII. Fuel Delivery Pipe Replacement For 2007-2008 LS460/LS460L
- VIII. Appendix For 2007-2008 LS460/LS460L
- Recall 09V388000: Floor Mat/Accelerator Interference
- Recall - Floor Mat/Accelerator Pedal Interference
- Recall - Fuel Leaks From Fuel Pressure Sensor
- Customer Interest
- Engine - MIL ON, Misfire DTC's, Runs Rough, Oil Consumption
- Canada - Engine - MIL ON/Misfire/DTCs/Oil Consumption
- Canada - Engine - Engine Intermittently Runs Rough
- Canada - Engine Control - MIL ON DTC's P0712/P0175
- Canada - Engine/A/T Controls - MIL ON DTC P0751 Set
- Canada - Engine Control - MIL ON DTCs P0172 P0175
- Canada - Engine Control - MIL ON DTC's P0172 P0175
- Canada - Engine Control - MIL ON DTC's P0300-P306
- Overview
- Inspection Procedure
- Repair Procedure: Disassembly Steps 1 - 12
- Repair Procedure: Disassembly Steps 13 - 22
- Repair Procedure: Disassembly Steps 23 - 34
- Repair Procedure: Vlave Lash Adjuster Replacement
- Repair Procedure: Reassembly Steps 1 - 12
- Repair Procedure: Reassembly Steps 13 - 25
- Repair Procedure: Reassembly Steps 26 - 36
- Repair Procedure: Reassembly Steps 37 - 43
- Canada - Emissions - Excessive Sulfur Odor
- Engine - MIL ON/Multiple Misfire DTC's Stored In Memory
- Engine - Runs Rough/Multiple Misfire DTC's Set/MIL ON
- Engine, A/T Controls - MIL ON/DTC P0751/P2714/P0894
- Engine Controls - MIL ON/DTC's P0172/P0175
- Exhaust System - Excessive Sulfur Odors
- By Symptom
- Abnormal wear/deterioration
- Customer Interest
- Engine - MIL ON, Misfire DTC's, Runs Rough, Oil Consumption
- Canada - Engine - MIL ON/Misfire/DTCs/Oil Consumption
- Canada - Engine - Engine Intermittently Runs Rough
- Canada - Engine Control - MIL ON DTC's P0712/P0175
- Canada - Engine/A/T Controls - MIL ON DTC P0751 Set
- Canada - Engine Control - MIL ON DTCs P0172 P0175
- Canada - Engine Control - MIL ON DTC's P0172 P0175
- Canada - Engine Control - MIL ON DTC's P0300-P306
- Overview
- Inspection Procedure
- Repair Procedure: Disassembly Steps 1 - 12
- Repair Procedure: Disassembly Steps 13 - 22
- Repair Procedure: Disassembly Steps 23 - 34
- Repair Procedure: Vlave Lash Adjuster Replacement
- Repair Procedure: Reassembly Steps 1 - 12
- Repair Procedure: Reassembly Steps 13 - 25
- Repair Procedure: Reassembly Steps 26 - 36
- Repair Procedure: Reassembly Steps 37 - 43
- Canada - Emissions - Excessive Sulfur Odor
- Engine - MIL ON/Multiple Misfire DTC's Stored In Memory
- Engine - Runs Rough/Multiple Misfire DTC's Set/MIL ON
- Engine, A/T Controls - MIL ON/DTC P0751/P2714/P0894
- Engine Controls - MIL ON/DTC's P0172/P0175
- Exhaust System - Excessive Sulfur Odors
- Driveability
- Odors
- Recalls
- Recall - Fuel Leaks From Fuel Pressure Sensor
- Dealer Letter
- Dealer Q&A
- Owner Letter 1
- Owner Letter 2
- Technical Instructions
- Information
- I. Operation Flowchart
- II. Identification of Affected Vehicles
- III. Preparation
- IV. Work Procedure Table of Contents
- V. Background
- VI. Safety Precautions
- VII. 2GR-FSE / 4GR-FSE Disassembly Procedure
- VIII. 3GR-FSE Disassembly Procedure
- IX. Fuel Pressure Sensor Inspection and Adjustment
- X. Intake Air Surge Tank Installation
- XI. Final Reassembly and Inspection
- XII. Appendix
- Recall 11V029000: Potential Fuel Pressure Sensor Leaks
- Recall 05V565000: Potential Accelerator Pedal Sticking
- Recall 07V545000: Fuel Line Replacement
- Recall 09V020000: Fuel Rail Replacement
- Recall - Fuel Pipe Replacement
- Dealer Letter
- Q & A
- Owner Letter
- Technical Instructions
- Information
- I. Operation Flow Chart
- II. Identification of Affected Vehicles
- III. Background
- IV. Preparation
- V. Safety Precautions
- VI. Work Procedure Table of Contents
- VII. Fuel Pipe Replacement
- VIII. 2006 GS 300 Disassembly & Reassembly
- IX. 2006 IS 250 Disassembly & Reassembly
- X. 2006 IS 350 Disassembly & Reassembly
- XI. Recalled Parts Disposal
- XII. Appendix
- Recall - Accelerator Pedal/Carpet Interference
- Recall - Fuel Rail Replacement
- Dealer Letter
- Q & A
- Owner Letter
- Technical Instructions For 2006-2007 GS300/350
- Information For 2006-2007 GS300/350
- I. Operation Flow Chart For 2006-2007 GS300/350
- II. Identification of Affected Vehicles For 2006-2007 GS300/350
- III. Preparation For 2006-2007 GS300/350
- IV. Work Procedure Table of Contents For 2006-2007 GS300/350
- V. Background For 2006-2007 GS300/350
- VI. Work Procedure Safety Precautions For 2006-2007 GS300/350
- VII. Fuel Delivery Pipe Replacement For 2006-2007 GS300/350
- A. Remove the Engine Covers and Discharge the Fuel System For GS300/350
- B. Remove the Intake Manifold For 2006-2007 GS300/350
- C. Remove Fuel Delivery Pipe For 2006-2007 GS300/350
- D. Remove and Inspect Fuel Injectors For 2006-2007 GS300/350
- E. Fuel Pipe Installation For 2006-2007 GS300/350
- F. GS350 2GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
- G. GS300 3GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
- H. Check For Fuel Leaks & Reassembly For 2006-2007 GS300/350
- VIII. Appendix For 2006-2007 GS300/350
- Technical Instructions For 2006-2007 IS250/350
- Information For 2006-2007 IS250/350
- Operation Flow Chart For 2006-2007 IS250/350
- I. Identification of Affected Vehicles
- II. Preparation For 2006-2007 IS250/350
- III. Work Procedure Table of Contents For 2006-2007 IS250/350
- IV. Background For 2006-2007 IS250/350
- V. Work Procedure Safety Precautions For 2006-2007 IS250/350
- VI. Fuel Delivery Pipe Replacement For 2006-2007 IS250/350
- VII. Appendix For 2006-2007 IS250/350
- Technical Instructions For 2007-2008 LS460/LS460L
- Information For 2007-2008 LS460/LS460L
- I. Operation Flow Chart For 2007-2008 LS460/LS460L
- II. Identification of Affected Vehicles For 2007-2008 LS460/LS460L
- III. Preparation For 2007-2008 LS460/LS460L
- IV. Table of Contents For 2007-2008 LS460/LS460L
- V. Background For 2007-2008 LS460/LS460L
- VI. Work Procedure Safety Precautions For 2007-2008 LS460/LS460L
- VII. Fuel Delivery Pipe Replacement For 2007-2008 LS460/LS460L
- VIII. Appendix For 2007-2008 LS460/LS460L
- Recall 09V388000: Floor Mat/Accelerator Interference
- Recall - Floor Mat/Accelerator Pedal Interference
- Recall - Fuel Leaks From Fuel Pressure Sensor
- All Technical Service Bulletins
- Engine - MIL ON, Misfire DTC's, Runs Rough, Oil Consumption
- Vehicle - Flood Damage Inspection And Handling
- Canada - Engine Controls - Accelerator Pedal Sensor Precaution
- Canada - Engine - MIL ON/Misfire/DTCs/Oil Consumption
- Canada - Engine - Engine Intermittently Runs Rough
- Canada - Engine Control - MIL ON DTC's P0712/P0175
- Canada - Engine/A/T Controls - MIL ON DTC P0751 Set
- Canada - Engine - Valve Timing Procedure
- Canada - Engine Control - ECM Reflash Procedure
- Canada - Engine Control - MIL ON DTCs P0172 P0175
- Canada - Engine Control - MIL ON DTC's P0172 P0175
- Canada - Engine Control - MIL ON DTC's P0300-P306
- Overview
- Inspection Procedure
- Repair Procedure: Disassembly Steps 1 - 12
- Repair Procedure: Disassembly Steps 13 - 22
- Repair Procedure: Disassembly Steps 23 - 34
- Repair Procedure: Vlave Lash Adjuster Replacement
- Repair Procedure: Reassembly Steps 1 - 12
- Repair Procedure: Reassembly Steps 13 - 25
- Repair Procedure: Reassembly Steps 26 - 36
- Repair Procedure: Reassembly Steps 37 - 43
- Canada - Emissions - Excessive Sulfur Odor
- Canada - Engine Control - TDT Lexus diagnostic Tester
- Canada - Engine Control - Failure Initialize CAN Interface
- Canada - Engine Control - ECM Reprogramming Process
- Canada - Engine Control - Entering VIN ECM Replacement/DTC P063
- Canada - Engine Control - Oxygen Sensor Location Identification
- Engine Controls - Accelerator Pedal Sensor Service Precautions
- Canada - Exhuast - Sulfur Odor/Smell From Exhaust
- Canada - Engine Control - Software And Calibration Files TDT
- Recall - Fuel Leaks From Fuel Pressure Sensor
- Dealer Letter
- Dealer Q&A
- Owner Letter 1
- Owner Letter 2
- Technical Instructions
- Information
- I. Operation Flowchart
- II. Identification of Affected Vehicles
- III. Preparation
- IV. Work Procedure Table of Contents
- V. Background
- VI. Safety Precautions
- VII. 2GR-FSE / 4GR-FSE Disassembly Procedure
- VIII. 3GR-FSE Disassembly Procedure
- IX. Fuel Pressure Sensor Inspection and Adjustment
- X. Intake Air Surge Tank Installation
- XI. Final Reassembly and Inspection
- XII. Appendix
- Recall 11V029000: Potential Fuel Pressure Sensor Leaks
- Engine - MIL ON/Multiple Misfire DTC's Stored In Memory
- Engine - Runs Rough/Multiple Misfire DTC's Set/MIL ON
- Engine Controls - Techstream(R) ECU Re-Flash Procedure
- Engine Controls - A/F And O2 Sensor Identification
- Engine, A/T Controls - MIL ON/DTC P0751/P2714/P0894
- Engine Controls - MIL ON/DTC's P0172/P0175
- Engine Controls - Entering VIN After PCM Replacement
- Recall 05V565000: Potential Accelerator Pedal Sticking
- Exhaust System - Excessive Sulfur Odors
- Engine Controls - Bank 1/Bank 2 O2 Sensor Identification
- Recall 07V545000: Fuel Line Replacement
- Recall 09V020000: Fuel Rail Replacement
- Recall - Fuel Pipe Replacement
- Dealer Letter
- Q & A
- Owner Letter
- Technical Instructions
- Information
- I. Operation Flow Chart
- II. Identification of Affected Vehicles
- III. Background
- IV. Preparation
- V. Safety Precautions
- VI. Work Procedure Table of Contents
- VII. Fuel Pipe Replacement
- VIII. 2006 GS 300 Disassembly & Reassembly
- IX. 2006 IS 250 Disassembly & Reassembly
- X. 2006 IS 350 Disassembly & Reassembly
- XI. Recalled Parts Disposal
- XII. Appendix
- Recall - Accelerator Pedal/Carpet Interference
- Recall - Fuel Rail Replacement
- Dealer Letter
- Q & A
- Owner Letter
- Technical Instructions For 2006-2007 GS300/350
- Information For 2006-2007 GS300/350
- I. Operation Flow Chart For 2006-2007 GS300/350
- II. Identification of Affected Vehicles For 2006-2007 GS300/350
- III. Preparation For 2006-2007 GS300/350
- IV. Work Procedure Table of Contents For 2006-2007 GS300/350
- V. Background For 2006-2007 GS300/350
- VI. Work Procedure Safety Precautions For 2006-2007 GS300/350
- VII. Fuel Delivery Pipe Replacement For 2006-2007 GS300/350
- A. Remove the Engine Covers and Discharge the Fuel System For GS300/350
- B. Remove the Intake Manifold For 2006-2007 GS300/350
- C. Remove Fuel Delivery Pipe For 2006-2007 GS300/350
- D. Remove and Inspect Fuel Injectors For 2006-2007 GS300/350
- E. Fuel Pipe Installation For 2006-2007 GS300/350
- F. GS350 2GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
- G. GS300 3GR-FSE Intake Manifold Reinstallation For 2006-2007 GS300/350
- H. Check For Fuel Leaks & Reassembly For 2006-2007 GS300/350
- VIII. Appendix For 2006-2007 GS300/350
- Technical Instructions For 2006-2007 IS250/350
- Information For 2006-2007 IS250/350
- Operation Flow Chart For 2006-2007 IS250/350
- I. Identification of Affected Vehicles
- II. Preparation For 2006-2007 IS250/350
- III. Work Procedure Table of Contents For 2006-2007 IS250/350
- IV. Background For 2006-2007 IS250/350
- V. Work Procedure Safety Precautions For 2006-2007 IS250/350
- VI. Fuel Delivery Pipe Replacement For 2006-2007 IS250/350
- VII. Appendix For 2006-2007 IS250/350
- Technical Instructions For 2007-2008 LS460/LS460L
- Information For 2007-2008 LS460/LS460L
- I. Operation Flow Chart For 2007-2008 LS460/LS460L
- II. Identification of Affected Vehicles For 2007-2008 LS460/LS460L
- III. Preparation For 2007-2008 LS460/LS460L
- IV. Table of Contents For 2007-2008 LS460/LS460L
- V. Background For 2007-2008 LS460/LS460L
- VI. Work Procedure Safety Precautions For 2007-2008 LS460/LS460L
- VII. Fuel Delivery Pipe Replacement For 2007-2008 LS460/LS460L
- VIII. Appendix For 2007-2008 LS460/LS460L
- Recall 09V388000: Floor Mat/Accelerator Interference
- Recall - Floor Mat/Accelerator Pedal Interference
- A/T - Park Neutral Position Switch Installation
- Canada - A/T - Park/Neutral Position Switch Installation
- Canada - Vehicle - Flood Damage Inspection