Replacement

REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB- ASSEMBLY (for Automatic Transmission)
2. REMOVE SHIFT LEVER KNOB SUB- ASSEMBLY (for Manual Transmission)
3. REMOVE UPPER NO.1 CONSOLE PANEL GARNISH (for Automatic Transmission)
4. REMOVE UPPER NO.2 CONSOLE PANEL GARNISH (for Automatic Transmission)
5. REMOVE CONSOLE PANEL SUB- ASSEMBLY (for Automatic Transmission)
6. REMOVE REAR CONSOLE PANEL SUB- ASSEMBLY (for Manual Transmission)
7. REMOVE FRONT CONSOLE PANEL SUB- ASSEMBLY (for Manual Transmission)
8. REMOVE FRONT ASH RECEPTACLE SUB- ASSEMBLY
9. REMOVE CONSOLE BOX REGISTER ASSEMBLY
10. REMOVE CONSOLE BOX
11. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
12. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL
13. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (W/o Navigation System)
14. REMOVE MULTI- DISPLAY WITH RADIO RECEIVER ASSEMBLY (W/ Navigation System)




15. REMOVE ENGINE SWITCH
a. Disconnect the switch connector.
b. Detach the 2 claws and remove the switch.

INSTALLATION




1. INSTALL ENGINE SWITCH
a. Attach the 2 claws to install the switch.
b. Connect the switch connector.
2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (W/o Navigation System)
3. INSTALL MULTI- DISPLAY WITH RADIO RECEIVER ASSEMBLY (W/ Navigation System)
4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL
5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
6. INSTALL CONSOLE BOX
7. INSTALL CONSOLE BOX REGISTER ASSEMBLY
8. INSTALL FRONT ASH RECEPTACLE SUB- ASSEMBLY
9. INSTALL FRONT CONSOLE PANEL SUB- ASSEMBLY (for Manual Transmission)
10. INSTALL REAR CONSOLE PANEL SUB- ASSEMBLY (for Manual Transmission)
11. INSTALL CONSOLE PANEL SUB- ASSEMBLY (for Automatic Transmission)
12. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission)
13. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission)
14. INSTALL SHIFT LEVER KNOB SUB- ASSEMBLY (for Manual Transmission)
15. INSTALL SHIFT LEVER KNOB SUB- ASSEMBLY (for Automatic Transmission)