Vehicle Stability Control System (w/ VDIM)

DTC C1246/46 Master Cylinder Pressure Sensor Malfunction
DTC C1281/81 Master Cylinder Pressure Sensor Output Malfunction (Test Mode DTC)

DESCRIPTION

DTC DETECTION CONDITION:

DTC C1281/81 can be deleted when the master cylinder pressure sensor sends a master cylinder pressure signal or the Test Mode ends. DTC C1281/81 is output only in the Test Mode.

WIRING DIAGRAM:

NOTICE: When replacing the skid control ECU, perform zero point calibration. Vehicle Stability Control System (W/ VDIM)

INSPECTION PROCEDURE

Step 1:

Steps 2-4:

Steps 4 (Continued)-5:

Steps 6-8:

Step 8 (Continued):