Camshaft Bearing: Specifications
CAMSHAFT BEARING CAP LHApply engine oil to the camshaft journal, camshaft housing and bearing cap.
Install the camshaft No.3 and camshaft No.4 to the camshaft housing LH.
Make sure of the marks and numbers on the camshaft bearing caps and place them in each proper position and direction.
Temporarily tighten the 8 bolts in the order shown in the illustration.
Torque 10 Nm (102 kgf-cm 7 ft. lbs.)
CAMSHAFT BEARING CAP RH
Apply engine oil to the camshaft journal, camshaft housing and bearing cap.
Install the camshaft and camshaft No.2 to the camshaft housing RH.
Make sure of the marks and numbers on the camshaft bearing caps and place them in each proper position and direction.
Temporarily tighten the 8 bolts in the order shown in the illustration.
Torque: 10 Nm (102 kgf-cm 7 ft. lbs.)