Vehicle Stability Control System

DTC C1246/46 Master Cylinder Pressure Sensor Malfunction

DTC C1281/81 Master Cylinder Pressure Sensor Output Malfunction (Test Mode DTC)

DESCRIPTION
Master cylinder pressure sensor is connected to the skid control ECU in the ABS and TRACTION actuator assembly DTC C1281/81 can be deleted when the master cylinder pressure sensor sends a master cylinder pressure signal or the test mode ends. DTC C1281/81 is output only in the test mode.

DTC Detection Condition:

NOTICE: When replacing the ABS and TRACTION actuator assembly, perform zero point calibration. Vehicle Stability Control System

INSPECTION PROCEDURE

Steps 1-2:

Steps 3-4: