C1247

DTC C1247/47 Stroke Sensor Malfunction

DTC C1346/71 Stroke Sensor Zero Point Learning Malfunction (Test Mode DTC)

DTC C1392/48 Stroke Sensor Zero Point Calibration Undone

DESCRIPTION
The stroke sensor inputs the pedal stroke into the skid control ECU. DTC C1346/71 can be deleted when the brake pedal stroke sensor sends a stroke sensor signal or the Test Mode ends. DTC C1346/71 is output only in the Test Mode.

DTC Detection Condition:

Wiring Diagram:

NOTICE: When replacing the skid control ECU or brake pedal stroke sensor, perform initialization of linear solenoid valve and calibration. Programming and Relearning

INSPECTION PROCEDURE

Steps 1-2:

Steps 2-4:

Steps 5-7:

Steps 7-8: