Initial Inspection and Diagnostic Overview

INSPECTION







1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH
a. When fastening the seat belt (Buckle switch is OFF):
1. Measure the resistance between the terminals.
If the result is not as specified, replace the front seat inner belt assembly.




b. When releasing the seat belt (Buckle switch is ON):
1. Measure the resistance between the terminals.
If the result is not as specified, replace the front seat inner assembly.







2. INSPECT FRONT SEAT INNER BELT ASSEMBLY RH
a. When fastening the seat belt (Buckle switch is ON):
1. Measure the resistance between the terminals.
If the result is not as specified, replace the front seat inner belt assembly.




b. When releasing the seat belt (Buckle switch is OFF):
1. Measure the resistance between the terminals.
If the result is not as specified, replace the front seat inner belt assembly.