Component Inspection

INSPECTION







1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH
a. Inspect the seat cushion thermostat continuity.
1. Disconnect the seat back heater from the seat cushion heater.
2. Heat the temperature sensor and thermostat with a light.
3. Inspect the seat cushion heater continuity between terminals, as shown.
If continuity is not as specified, replace the seat cushion heater assembly.







2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH
a. Inspect the seat cushion thermostat continuity.
1. Disconnect the seat back heater from the seat cushion heater.
2. Heat the temperature sensor and thermostat with a light.
3. Inspect the seat cushion heater continuity between terminals, as shown.
If continuity is not as specified, replace the seat cushion heater assembly.







3. INSPECT FRONT SEAT BACK HEATER ASSEMBLY LH
a. Inspect the seat back heater assembly LH continuity.
If continuity is not as specified, replace the seat back heater assembly.







4. INSPECT FRONT SEAT BACK HEATER ASSEMBLY RH
a. Inspect the seat back heater assembly RH continuity.
If continuity is not as specified, replace the seat back heater assembly.