Foreign Matter Is Attached On Tip of Left Front Sensor

DTC 36 FOREIGN MATTER IS ATTACHED ON TIP OF LEFT FRONT SENSOR

CIRCUIT DESCRIPTION

DTC Detection Condition:

The speed sensor detects wheel speed and transmits the appropriate signals to the ECU. These signals are used for control of the ABS and VSC control systems.

Each of the front and rear rotors has 48 serrations. When the rotors rotate, the magnetic field generated by the permanent magnet in the speed sensor induces an AC voltage.Since the frequency of this AC voltage changes in direct proportion to the speed of the rotor, the frequency is used by the ECU to detect the speed of each wheel.

HINT:
- DTCs No. C0200/31 and C1235/35 are the right front speed sensor.
- DTCs No. C0205/32 and C1236/36 are the left front speed sensor.

Wiring Diagram:

Step 1:

Step 2 - 3:

Step 4 - 5:

Step 6 - 7:

INSPECTION PROCEDURE

HINT: Start the inspection from step 1 when using hand-held tester and start from step 2 when not using hand-held tester.