Front

HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT LH
REPLACEMENT

HINT:
^ Use the same procedures for the RH side and LH side.
^ The procedures listed are for the LH side.

1. REMOVE FRONT WHEELS
2. REMOVE HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT LH





a. Disconnect the connector.
b. Remove the nut and disconnect the height control sensor link.





c. Remove the 2 bolts and height control sensor sub-assembly front LH.
3. INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT LH





a. Install the height control sensor sub-assembly front LH with 2 bolts.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)





b. Connect the height control sensor link with a nut.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Connect the connector.
4. INSTALL FRONT WHEELS
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
5. ADJUST VEHICLE HEIGHT