Front

HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT LH

REPLACEMENT
1. REMOVE FRONT WHEEL




2. REMOVE HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT LH
a. Disconnect the connector.
b. Remove the nut and disconnect the height control sensor link.




c. Remove the 2 bolts and the height control sensor sub-assembly front LH.




3. INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT LH
a. Install the height control sensor sub-assembly LH with the 2 bolts.




b. Install the height control sensor link with the nut.

Torque: 5.4 Nm (55 kgf.cm, 48 in.lbf)

c. Connect the connector.

4. INSTALL FRONT WHEEL

Torque: 103 Nm (1,050 kgf.cm, 76 ft.lbf)

5. HEADLIGHT AIM ONLY