Without Navigation System

ENGINE OIL REPLACEMENT REMINDER
After replacing the oil, be sure to reset the maintenance data.

To reset the data perform the following procedure:

1. Push the "ODO/TRIP" button to change the display to blank.

2. Turn the ignition key to the "OFF" position.

3. Turn the ignition switch to "ON" with the trip meter "RESET" button held down.

4. Keep pushing the "RESET" button for longer than 5 seconds after the ignition is turned on.

After the above operation the master warning light comes on, a warning tone sounds and the message "Mileage Reset" appears to inform you that the engine oil maintenance data has been reset.