Rear Vision Camera: Service and Repair

Audio Visual System Part 1:

TELEVISION CAMERA ASSEMBLY

REPLACEMENT

HINT:
- Installation is in the reverse order of removal.

1. REMOVE REAR COMBINATION LAMP SERVICE COVER RH
2. REMOVE REAR COMBINATION LAMP SERVICE COVER LH
3. REMOVE LUGGAGE COMPARTMENT LAMP ASSEMBLY NO.1
4. REMOVE BACK DOOR TRIM COVER
5. REMOVE LUGGAGE OPENER CANCEL CYLINDER & KEY SET
6. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY
7. REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE




8. REMOVE TELEVISION CAMERA ASSEMBLY
a. Disconnect the connector.
b. Remove the 2 bolts and television camera assembly.

9. INSTALL TELEVISION CAMERA ASSEMBLY
a. Install the television camera assembly with the 2 bolts.
b. Connect the connector.