Removal

Part 1 Of 3:

Part 2 Of 3:

Part 3 Of 3:

REMOVAL
1. RAISE VEHICLE

NOTICE: Make sure that the vehicle is securely, supported.

2. REMOVE FRONT EXHAUST PIPE
3. REMOVE HEAT INSULATOR
Remove the 6 bolts and heat insulator.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
4. DISCONNECT SHIFT CONTROL ROD
5. LOWER VEHICLE
6. REMOVE THESE PARTS
^ Grove compartment panel assembly
^ Box plate
^ No.2 under cover
^ No. 1 safety pad
^ No. 1 under cover
^ Cluster finish panel
^ Lower rear console box
^ Console box and rear console armrest
^ No.3 console box mounting bracket
^ Ash receptacle
^ No.1 console box duct
^ Finish plate
^ End pad





7. REMOVE SHIFT LEVER ASSEMBLY
a. Disconnect the connectors and wire harness from the shift lever assembly.
b. Remove the 4 bolts and shift lever assembly.
Torque: 8.3 Nm (85 kgf-cm, 74 inch lbs.)