With Manufacturer's Scan Tool
DTC CHECK USING HAND-HELD TESTERCheck DTCs using the hand-held tester
1. Turn the ignition switch off.
2. Connect the hand-held tester to the DLC3.
3. Turn the ignition switch to the ON position.
4. Read DTCs on the tester screen.
Clear the DTCs using the hand-held tester.
1. Turn the ignition switch off.
2. Turn the ignition switch to the ON position.
3. Clear the DTCs following the prompts on the tester screen.
HINT: Hand-held tester has a "Snapshot" function which records the monitored data. Refer to the hand-held tester operator's manual for further details.